NHG600S Single roller fusing press machine

Main features:

1. Adopts Taiwan PLC program control, automatically finish all functions, assorting with the equipment work.
2. single roller in the up and down to make pressing work
3. Even heating temperature, temperature difference of every place inside the heating area is not more than 8℃
4. The roller stable, it has very even pressing on the full width roller
5. Mechanical transmission is very stable, low noise, the max. noise is not over 70 decibel
6. Equipped with power off hand moving handle to rotate the roller and conveyor belt by hand so that the heating is fast radiated out, to protect the roller and belt from the burn damage.
7. Temperature, pressure, speed can be adjusted in the regulated range at will
8. Lateral displacement of the Fusing press belt adopts electrical system to automatically control, the max. lateral displacement is lower±4mm
9. Easy operation, it is easy to maintain the mechanical and electrical parts.

Main parameters:
Working pressure: 380V 50Hz
Power supply   
Driving motor; 200W    AC380V
Deviation adjusting motor: 20W×2 AC110V
Heater; 7.2 kW   380V
total： 7.44kW
Roller pressure: 0—0.4MPa (0—4kgf/cm2)
Fusing press width: 600mm
Processing length: any long
Conveyor belt speed   1m/min-8m/min (ONE JOURNEY TIME IS 6-30s) stepless speed regulate
Fusing press temperature: 0—200℃
Dimensions: 2910×1062×1270(L*W*H)) mm
Weight: 420kg

Return